Precision Perfomance Products
Revolt 30

The Revolt 30 has a sleek, mono hull design profile that slices through the water, a brushless power system that puts you out in front, and lots of genuine high-performance GrimRacer parts. Choose between the Performance-Ready 2.4GHz version and one that's ready to accept your choice of transmitter and receiver — both available in 4 hot trim schemes!
Water cooled 6-pole 1800kv brushless motor.
60A brushless controller w/4mm bullet connectors and Deans Ultra Plugs for your lipos.
High performance GrimRacer hardware package and metal 42x55 prop.
You can use either two 2s lipos or one 4s lipo.

4mm Aluminum Bullet Nut  Hard anodized aluminum. Has a 4mm thread. Fits the stock Aquacraft shaft. $2.00

Revolt Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with stainless drive dog, locking prop nut and teflon liner. Has a 10-32 thread.  $23.00

10-32 Brass Bullet Nut   Solid brass bullets for 3/16 shafts. Natural or Nickle. Fits upgrade shafts. $3.45


Stainless Steel 5mm x .150  2pc collet that fits a 5mm motor shaft and .150 flex cable.   $10.00ea

Grim Racer Speed Grease  AQUB9500  2ounces  One of the best cable greases on the market and enough to last years.

GrimRacer 42 X 55  Aquacraft #AQUB9725  Stock Replacement prop.
Diameter 42mm - pitch 55mm.   Fits 3/16 shaft.   Made in USA

Prather 220
   Has  diameter of 1.72" (43.7mm) and a pitch of 1.5, total 2.6"     Fits a 3/16 shaft.    Made in USA
  S220 Out of Stock

GrimRacer L44 X 66   #AQUB9765   High Lift prop.   Diameter of 44mm and pitch of 66mm.   Fits 3/16 shaft.  Made in USA.

GrimRacer L45 X 68 Lifter  Diameter of 45mm (1.772) and a total pitch of 68mm (2.677).

Aquacraft Water Jacket  Aquacrafts new anodized aluminum water jacket for their 1800kv and 2050kv motors. Has 8 positions for the water fittings for better line positioning. $6.30 each

AuaCraft Brushless 6 Pole Marine Motor 36-56-1800kv   Stock replacement motor.  $79.99

Aquacraft Marine Brushless 36-56-2030kv  Upgrade motor. #AQUG7001  6 pole, 7-18.5volt, 50amp, 5mm shaft, 4mm plugs.  $79.99

Aquacraft Stainless Steel M4 Prop Nut w/ Nylon Insert  AQUB7759  $.70

Aquacraft Motor Mount w/ Mounting Hardware  AQUB7910  $21.50

Aquacraft Revolt .150 Flex w/ .187 Prop Shaft  AQUB8002  $9.00

Aquacraft Revolt Brass Bushing  AQUB8003  $6.30

Aquacraft Rudder Blade 25-35" Hulls w/ Rudder Bolts   AQUB8753  $13.50

Aquacraft Rudder Bracket 25-35" Hulls  AQUB8754  $11.00

Aquacraft Rudder Blade Mount 25-35" w/ Hing Pin  AQUB8755  $10.00

Aquacraft Rudder Control Arm 25-35"  AQUB8756  $3.60

Aquacraft Rudder Back Plate Mount 2535 w/ Hardware  AQUB8757  $2.70

Aquacraft Rudder Linkage w/ Ball Link and Clevis  AQUB8758  $4.50

Aquacraft Servo Mount 40mm w/ Mounting Hardware  AQUB8782  $5.50

Aquacraft Strut 25-35" Hulls  AQUB8808  $9.00

Aquacraft Strut Mounting Brackets 25-35"  AQUB8810  $8.00

Aquacraft Strut Back Plate Mount 2535 w/ Bolts, Nuts, Washers  AQUB8811   $2.70

Aquacraft Cable Liner Revolt  AQUB9004 Fits 1/4 tube and .150 flex.    $1.35

Aquacraft GrimRacer Carbon Fiber Trim Plates  AQUB9541 Trim plate set for mono hulls 25"-35".   $17.00

Aquacraft GrimRacer Rudder Assembly  AQUB9542 Rudder Assembly for mono hulls 25"-35".   $30.00

Aquacraft GrimRacer Strut Assembly  AQUB9543 Strut Assembly for mono hulls 25"-35".   $15.00

Aquacraft GrimRacer Turn Fin Set  AQUB9544 Turn fin set for mono hulls 25"-35".   $20.00

Aquacraft GrimRacer Motor Coupler  AQUB9545 Collet for 5mm motor and .150 flex cable.   $8.00

Aquacraft .187 Drive Dog  AQUB9547  Drive dog with set screw. $1.80

Aquacraft Revolt 30 Fiberglass Blue Cowl  AQUB6236  $37.00

Aquacraft Revolt 30 Fiberglass Red Cowl  AQUB6237  $37.00

Aquacraft Revolt 30 Fiberglass Sliver Cowl  AQUB6238  $37.00

Aquacraft Revolt 30 Fiberglass White Cowl  AQUB6239  $37.00

Website Builder