KINTEC RACING
Precision Perfomance Products
Pro Boat


Black Jack 24" Upgrade Strut Kit  This upgrade strut with a floating bushing will take the boat to the next level. To be used with the Kintec upgrade flex shaft. Will require you to cut the stock stuffing tube 1 1/8 inch shorter. Easy to do with a Dremel cutoff wheel or an X-Acto razor saw.

Black Jack 24 Upgrade Your Strut Kit. Send in your strut arm with your receipt and we will modify it for you.


KR Black Jack 24 replacement bushing  Floating bushing for the upgrade kit.


Black Jack 24" Upgrade Shaft Comes with Drive dog, pinch nut and soldered end. Intended for use with the Kintec Upgrade Strut or the stock setup. Use a 3/16 prop. $20.00


Black Jack 24 & Shockwave 26 Upgrade Motor Mount  This motor mount allows you to use an upgraded 2pc stainless collet which gives more flex engagement. Two addition mounting holes added so you can add two extra bolts if desired but not required. Bolts included.
 


Stainless Steel 5mm x .150  2pc collet that fits a 5mm motor shaft and .150 flex cable.  Same length as the octura long but much nicer.   $10.00ea



Shock Wave 26 Upgrade Strut Kit   Modified strut with floating bushing. You will have to cut your black tube 3/16" from the transom to mount this strut.

ShockWave 26 Upgrade Your Strut Kit  Send in your strut and we will modify it for you.


KR Shock Wave 26 replace bushing  For the KR upgrade strut, Will not fit stock strut.


ShockWave 26" Upgrade Shaft  Comes with drive dog, pinch nut and soldered end. Direct bolt on to stock boat or with KR strut kit shown above. Use a 3/16 prop. $20.00


BlackJack 29 Break Away Bracket A direct bolt on rudder bracket with break away feature to protect the rudder and transom. $25.00



Mystic Break Away Bracket This bracket is machined for the same placement as the stock rudder but has the breakaway feature to protect your transom and rudder.  $25.00



Geico Offset Rudder Bracket  This bracket moves the rudder off center and closer to the transom to get the rudder out of the prop wash. This also allows for easier greasing of the flex cable. Works great with breakaway bolts. Mounting bolts and rudder shim included.
 


Shear Bolts  For use with Kintec offset bracket.



Removable Replacement Bushing  Before your shaft seizes to the stock bushing you might want to change it out for one that can be greased. This is a floating bushing and will spin freely.


V3 Miss Geico29, BlackJack29 V3 Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for better collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with stainless drive dog, locking prop nut. Has a 10-32 thread. Made for a 3/16 prop. Tip to tip measures 12.00 inch.  $23.00



BlackJack29, Miss Geico, Mystic Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for better collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with stainless drive dog, locking prop nut. Has a 10-32 thread. Made for a 3/16 prop. Tip to tip measures 12.75 inch.



Impulse 31 Upgrade Shaft  Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut. Has a 10-32 thread.  $23.00


Impulse 31 V3 Upgrade Shaft  Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut. Has a 10-32 thread.  $23.00



Voracity 3/16 One Piece Upgrade Shaft  For the Voracity with single motor drive. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. $25.00


Zelos 36" Twin 3/16 One Piece Upgrade Shaft  For the Zelos 36" with Dual motor drive. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. $25.00
Rotation


Push Button Hatch Locks  Aluminum spring loaded hatch locks. 10mm diameter. Sold in pairs for $6.00



10-32 Brass Bullet Nut   Solid brass bullet for 3/16 shafts. Solid brass and Nickel plated brass. $3.45

color


Stainless Steel 5mm x .150  2pc collet that fits a 5mm motor shaft and .150 flex cable.  Same length as the octura long but much nicer.   $10.00ea

Prather 215
    This is the same as the stock prop.  Has a diameter of 1.6" (40.6mm) and a total pitch of 2.5"
    Fits a 3/16 shaft.    Made in USA
 
Alloy

Prather 220
   Has  diameter of 1.72" (43.7mm) and a total pitch of 2.6"     Fits a 3/16 shaft.    Made in USA

Alloy


Octura Collet Short  For 5mm motor shaft and .150 flex cable.

Website Builder