Note: We do not send order confirmation e-mail, you can check it in your paypal account. Tracking numbers will be sent when the box is shipped, you also can find them on the details page of your paypal account.
Carbon Fiber 33" Harpoon On the Hulls page
KR Genesis 3/16 Upgrade Strut This strut converts your Genesis to 3/16 drive. Comes with standard length floating bushing.
KR Large Transom Fitting Anodized aluminum large fitting for 4mm line and larger. Has a full 4mm diameter thru hole. Threads are 1/2 inch long for the thickest transoms.
KR M41 Dual Pickup Rudder Blue anodized cnc machined dual cooling rudder. This is a direct bolt on to stock bracket, nothing else needed. Run one line to your esc and the other to the motor for maximum performance. $22.00
M41 3/16 Upgrade Kit Welded 3/16 flex and 3/16 shaft cut to length with soldered end for collet grip. 10/32 locknut. Upgrade strut with 3/16 floating bushing. Stainless steal 3/16 collet. This is a direct bolt on unit. $55.00
Transom Mounted Servo Holder Standard size servo mount bolts to the transom with two 3mm screws or bolts. Anodized aluminum. 1 1/2" wide x 2 3/4" long. $12.00
Motor Mounting Hex Key Set This is a must have for installing motors in most FE boats. Made with 1/4 hex stock and 2.5mm High Torque Allen key. Use with your socket or open end wrench to make motor installation so much easier. $7.50
Carbon Fiber Cheetah
Pro Boat Black Jack 24" Upgrade Strut Kit
On the ProBoat page.
Carbon Fiber Pursuit
KR 2 Axis Motor Mount Plate
Made for flat bottom or deep vee installs. Increased adjustability and is a direct bolt on replacement for the TFL mounts, no mods required. $7.00
KR X-Long 2 Axis Carbon Fiber Motor Mount Fits 36mm or 40mm diameter motors. Made for flat bottom or deep vee installs.
This motor mount allows for angular adjustment and height alignment to
the stuffing tube. Multiple mounting holes for the lowest possible
center of gravity. Nice large opening for thrust bearings and allows you
to remove the motor without removing the collet. The adjustable tail
brace allows for any length motor and up to a 70mm water jacket. The low profile makes
installing and motor maintenance easier. Tail ring sold separately. Only available at Kintec Racing. $30.00
Carbon Fiber Rudder Made from solid carbon fiber sheet. Extra length rudder at 140mm (5 1/2") over all length. Fits the Popeye, Zonda, Genisis and our center mount cat bracket.
Kintec Racing's 3.5 Bullet Drive Motor Mount Bolts on transom using same hole
pattern as the Hyperformance motor mount. Larger bolts keeps the Bullet Drive from moving. Is a direct bolt on, no need to change anything. $15.00
Carbon Fiber Popeye Hydro
Dual Cooling Upgrade Rudder Fits Popeye, Zonda, Genisis. 125mm total length. $17.00
Quanum GPS Logger V2
Records everything from; distance traveled, start and end positions, UTC time stamps, course, speed and MAX speed the logger reached. The data can be viewed on the backlit LCD or the NEMA data can be downloaded to a PC and plotted out on map sites such as Google Earth. $55.00
All Sizes on the Lipo Page
2S Balance Tap Extension For JST-HX balance taps, 8inch (20cm) long. $1.00
OrangeRX GR300 Spektrum DSM2 3Ch 2.4Ghz Ground Receiver
The OrangeRx GR300
will work with ANY Spektrum DSM2 2.4Ghz ground transmitter. Built in Fail safe. $15.00
One For All Balance Board This mulit adapter balancing board makes things easy. Balance any type lipo 2-6s. Has balance plugs for JST-HX, Hyperion, ThunderPower, Flight Power, Align, JST-EH, Robbe, Graupner, Poly. No need to carry any other board. Has 3 plugs for the balance cable to charger so no matter what you have it will fit. $6.50
BlackJack 29 Break Away Bracket A direct bolt on rudder bracket with break away feature to protect the rudder and transom. $25.00
Mystic Break Away Bracket This bracket is machined for the same placement as the stock rudder but has the breakaway feature to protect your transom and rudder. $25.00
Voltage Protector This
voltage protector helps prevent your receiver from dropping below its required
operating voltage. This helps to eliminate "brown outs" and prevents your
receiver from rebooting. It will also help reduced the load on your ESC
BEC and reduce the likelihood of glitching. Simply plug it in to any spare
channel on your receiver. $4.00 each
Zippy LiFe 2s 6.6v 1100 10c Great for powering the receiver. Ideal for high torque servos. Comes with a JR/Futaba type connector for the receiver and a JST-XH type connector for the balancer.
5.5mm Bullet Parallel Connectors Allows you to connect 2 lipos in parallel for double the run time. Made in USA. $15.00 per set
5.5mm Spark Eliminator This portable wire assembly eliminates the spark when plugging in your lipos and helps stop stressing your esc. The 5.5mm bullets are connected with solid copper bar to reduce resistance. Very easy to use just plug and go. $15.00
Low Voltage Alarm 2s-4s Made for on board use. Plugs into balance lead to detect low voltage on any cell. If any cell drops below 3.3v a very loud alarm will sound and the green lights change from green to red. Very handy lightweight unit. $3.75
Expandable Marine Foam This expandable 2 part polyurethane water proof flotation boat foam is low density and closed cell
. It weighs 2 pounds per cubic foot. Each kit contains 3oz of each part A and B. $10.00 per kit.
Ships to US customers only.
Note: When an item will be out of stock for a length of time the "Add to Cart" button is removed.
Note: Do not put attachments in e-mail