KINTEC RACING
Precision Perfomance Products
Flex Cables
Custom Flex Cables Available  e-mail info@kintecracing.com


3/16 Prop Nuts  Self locking. Commonly called clinch or zuber nuts. The best there is. Only 60 cents each.
Has a 10-32 thread for 3/16 shafts.


1/4 Prop Nuts  Self locking commonly called clinch or Zuber nuts. The best there is. Only .85 cents each.
Has a 1/4-28 thread for 1/4 shafts.



4mm Prop Nuts  Self locking commonly called clinch or Zuber nuts. Fits a 4mmx.70 thread. $1.25 cents each.



5mm Prop Nuts  Self locking commonly called clinch or Zuber nuts. Fits 5mmx.80 thread.  $1.25 cents each.



KR 3/16 Short Bushing  This bushing fits a 3/16 shaft. Same length as the Aquacraft bushing but has a much better fit. Made in USA. $6.00



KR 3/16 Strut Bushing  This bushing fits a 3/16 shaft perfectly. Total length is 1.9 inch (49mm). Made in USA  $6.00


KR 3/16 Flared Bushing  This Bushing fits a 3/16 shaft. Total Length is 1.9 inch (49mm). Made in USA $5.00



KR 1/4 Strut Bushing This bushing fits a 1/4 shaft. Total length is 2.4 inch (61.75mm). Made in USA  $6.00


KR 1/4 Flared Strut Bushing This bushing fits a 1/4 shaft. Total length is 2.4 inch (61.75mm) Made in USA $5.00



Stuffing Tube Seal for 3/16 flex and 9/32 brass tube (7.2mm tube).



Stuffing Tube Seal for 1/4 flex and 11/32 brass tube (8.8mm tube).
   


KR .078 x 3/16 Wire Drive Assy   Made using KR hardened stainless 3/16 shaft, KR stainless 3/16 small dog, with pinch nut included. Comes in two lengths, 14 inch and 20 inch total length. Another quality Kintec Racing product only available here.
Length


.150 Welded Flex Cable  .150 flex cable with hardened and ground 3/16 prop shaft. Has a 10-32 thread and is approximately 15 inches long.


3/16 Welded Flex Cables   .187 (3/16)  flex cable with 3/16 ground shaft. Excellent quality and very strong. Very well balanced and true running. Has a 10-32 thread. Approximately 20 inches long.

 

3/16 Welded Flex Cables Reverse Wind   .187 (3/16)  flex cable with 3/16 ground shaft. Approximately 20 inch total length. Excellent quality and very strong. Very well balanced and true running. Has a 10-32 thread. Made in USA.

Length


1/4 x 3/16  Aeromarine Welded Flex Cable  1/4 flex cable with 1/4 ground shaft for strut reduced for 3/16 props. Excellent balance and quality, very strong. Has a 10-32 thread.
Length


1/4 Aeromarine Welded Flex Cables  1/4 flex cable with 1/4 ground shaft. Excellent quality and very strong. Very well balanced and true running. Has a 1/4-28 thread.
Length


Impulse 31 Upgrade Shaft  Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut. Has a 10-32 thread.  $23.00



Impulse 31 V3 Upgrade Shaft  Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut. Has a 10-32 thread.  $23.00



Revolt Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with stainless drive dog, locking prop nut and teflon liner. Has a 10-32 thread.  $23.00



V3 Miss Geico29, BlackJack29 V3 Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for better collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with stainless drive dog, locking prop nut. Has a 10-32 thread. Made for a 3/16 prop. Tip to tip measures 12.00 inch.  $23.00



BlackJack29, Mystic, Miss Geico Upgrade Shaft     Perfectly balanced. Cut to length. Soldered end for collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut. Has a 10-32 thread.  Tip to tip measures 12.75 inch.  $23.00



Motley Crew Upgrade Flex Shaft  Replacement Upgrade shaft. Better balanced for less bushing wear. Comes with soldered collet end, Stainless drive dog, teflon liner and lock nut.  $25.00



UL-1 Upgrade Flex Shaft   Better balanced for less vibration and wear on the drive line. Lock nut, Stainless drive dog and teflon liner included. Soldered end. 10x32thd
This is a .150 cable with a 3/16 shaft. Measures 13 5/8 inches (346mm) from tip to tip.



SV27/SV27R Upgrade Flex Shaft   Better balanced for less vibration and wear on the drive line. Lock nut, Stainless drive dog and teflon liner included. Soldered end.  10 x 32 thread



Prince/Rocket Upgrade Flex Shaft    This is the flex shaft for the upgrade strut. Perfectly balanced. Cut to length. Soldered end for better collet grip. Machined drive dog slot.  .150 cable x 3/16 shaft. Complete unit with Stainless drive dog, locking prop nut and teflon liner. Has a 10-32 thread.



Zonda One Pc Flex Cables are on the Zonda page. 


Popeye 3/16 One Piece Upgrade Shaft  Replaces the stock 2 pc shaft for easier greasing and lasts longer. Includes 10-32 lock nut, drive dog slot, and soldered collet end.


Genesis 3/16 One Piece Upgrade Shaft  For the Genesis with single motor drive. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. $25.00


Genesis Dual Drive 3/16 One Piece Upgrade Shaft  For the Genesis with Dual motors and KR upgrade strut. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. $25.00
Rotation


Pursuit w/ Stinger 3/16 One Piece Upgrade Shaft  For Pursuits with Stinger. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. A perfect upgrade that is direct bolt on. Nothing else needed. $25.00


Pursuit w/ Strut 3/16 One Piece Upgrade Shaft  For Pursuits with Strut. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. A perfect upgrade that is direct bolt on. Nothing else needed. 10-32 thread. $25.00


Voracity 3/16 One Piece Upgrade Shaft  For the Voracity with single motor drive. Welded 3/16 flex and 3/16 shaft. Cut to length with soldered end. Includes Locking prop nut. $25.00


4mm Welded Flex Cables   4mm  flex cable with 4mm Stainless Steel ground shaft. Excellent quality and very strong. Very well balanced and true running. Approximately 15 inches long (370mm). Has a 4mm standard thread. $22.00



4mm Reverse Welded Flex Cables   4mm reverse wind flex cable with 4mm Stainless Steel ground shaft. Excellent quality and very strong. Very well balanced and true running. Approximately 15 inches total length (370mm). Has a 4mm standard thread. $22.00



4mm x 1/8 one pc  Has a 4mm shaft and 1/8 flex. 4mm shaft is 2 1/2 long. Total length is 14 inches.



4mm Replacement Cable   This is a 4mm flex cable with 3.3mm (.130") square drive on one end and round on the other.   300mm long (11 7/8")  Used in Rocket, Prince, Apparition, Genesis boats   $8.00
 


4mm Replacement Cable Right Hand or Reverse   This is a 4mm flex cable with 3.3mm (.130") square drive on one end and round on the other.   300mm long (11 7/8")  Used in Dual drive Apparition, Genesis boats for the right hand props.
 


4mm Square Drive Shaft   Total length is 62mm. This is the replacement drive shaft that comes with the Prince/Rocket/Apparition/Genesis. $6.00
 


4mm Reverse Square Drive Shaft   This replacement drive shaft is for dual drive boats that use reverse wind cables. Also has a left hand thread w/ nut. Total length is 62mm.  $6.00
 


4mm Drive Shaft  Extended length 75mm. Threaded for prop nut. Square drive for cable.


4mm Reverse Drive Shaft  Extended length 75mm. Reverse thread for prop nut. Square drive.



3/16 Flex w/ Square Drive  This is the stock replacement shaft that comes on the Pursuit boat.
3/16 flex 11 7/8 (300mm) long with 3.7mm square drive on one end and round on the other. $8.00



3/16 Flex Reverse Wind w/ Square Drive   3/16 flex with reverse wind for counter rotating dual drives.
11 7/8 (300mm) long with 3.7mm square drive on one end and round on the other.  $8.00



3/16 Drive Shaft (Pursuit)  This is the stock replacement shaft that came on the boat. Small diameter is 3/16 inch, large diameter is 1/4 inch, 100mm long, 2.7mm (.100) square drive.  $7.00


1/4 Flex Cable Each end Squared  Standard wind. Squared on each end. 300mm long (11 7/8")  $10.00ea


1/8 Teflon Washers   Place between the drive dog and strut to prevent wear. For 1/8 inch shafts.
Pack of 5 for $2.75


4mm Teflon Washers   Place between the drive dog and strut to prevent wear. For 4mm shafts.
Pack of 5 for $2.75


3/16 Teflon Washers   Place between the drive dog and strut to prevent wear. Can be used on 3/16 or 4mm shafts. Pack of 5 for $3.00


5mm Teflon Washers   Place between the drive dog and strut to prevent wear. Can be used on 3/16 or 5mm shafts. Pack of 5 for $3.75


1/4 Teflon Washers  Place between the drive dog and strut to prevent wear. Pack of 5 for $3.75



1/8 Flex Saver  Aluminum flex shaft saver. Fits 1/8 flex. Goes between the collet and stuffing tube to prevent losing the shaft.  $5.00


  .150 Flex Saver  Aluminum flex shaft saver. Fits .150 flex. Goes between the collet and stuffing tube to prevent losing the shaft.  $5.00


4mm Flex Saver  Aluminum flex shaft saver. Fits 4mm flex. Goes between the collet and stuffing tube to prevent losing the shaft.  $5.00


3/16 Flex Saver  Aluminum flex shaft saver. Fits 3/16 flex. Goes between the collet and stuffing tube to prevent losing the shaft.  $3.50


5mm Flex Saver  Aluminum flex shaft saver. Goes between the collet and stuffing tube to prevent losing the shaft.  $5.00


1/4 Flex Saver  Stainless steel flex shaft saver. Goes between the collet and stuffing tube to prevent losing the shaft.  $4.00


1/4 Flex Saver  Aluminum flex shaft saver. Fits 3/16 flex. Goes between the collet and stuffing tube to prevent losing the shaft.  $3.50
Website Builder