One For All Balance Board This mulit adapter balancing board makes things easy. Balance any type lipo 2-6s. Has balance plugs for JST-HX, Hyperion, ThunderPower, Flight Power, Align, JST-EH, Robbe, Graupner, Poly. No need to carry any other board. Has 3 plugs for the balance cable to charger so no matter what you have it will fit. $6.50
Traxxas EZ-Peak Plus 6 Amp AC/DC Fast Charger Balancer
Charges 1-6 cell LiPo, LiFe and LiIon, 1-15 cell NiCd, NiMH, and 2-20V lead acid batteries
Full 6A output allows simultaneous charging of 2-3 cell lithium packs
(dual charging boards not included, must be purchased separately)
#2917 2S Dual Charging Board, TRAP2917
#2918 3S Dual Charging Board, TRAP2918
Peak detection technology with Fast Charge, Balance Charge and
Saves up to five charging profiles
2A discharger with adjustable current of 0.1 - 2.0A (10W max)
Cooling fan $90.00
Onyx 235 AC/DC Advanced Charger with built in balancer. Charges 1-10 cell NiCd or NiMH cells and 1-4 cell LiPo, Li-Ion or LiFe (3.7 - 14.8V) cells
Includes: DuraTrax Onyx 235 AC/DC Advanced Charger with Built-in Balancer and output adapters for Deans Ultra Plug, Traxxas and standard connectors, lithium balance adapters for ElectriFly and FlightPower/Thunder Power.
Onyx 245 AC/DC Dual Charger
with balancer. Charges 1-3 cell LiPo and LiFe (3.7-11.1V) and 4-8 cell NiCd and
NiMH batteries. Onyx 245 can charge two batteries of the same or different chemistries simultaneously. Advanced LCD display with backlight. FIVE YEAR warranty through Hobby Services.
INCLUDES: DuraTrax Onyx 245 AC/DC Dual Charger with Deans Ultra Plug, Traxxas
and Standard Connector Adapters for each output, ElectriFly and FlightPower/Thunder Power 6S Balance Boards and Instructions.
Hitec X1 MF Multi-Function AC/DC Charger Balancer
Charges 1-6 cell LiPo, LiFe and Li-Ion batteries 1-15 cell NiCd and NiMH batteries and 2-20V Pb (lead acid) cells
Operates on 11-18V DC or 100-240V AC power sources
Automatic charge and discharge current settings to prevent overcharging
Cyclic charging/discharging-1 to 5 cyclic and continuous processes for battery refreshing and balancing
Internal independent lithium battery balancer
"Fast" and "Storage" lithium battery charge modes
LiPo battery meter displays total battery voltage, each cell voltage, and highest & lowest cell voltage
Balance board with balance plug sockets for JST-EH, JST-XH, Thunder Power/Flight Power, and Hyperion/Polyquest balance plugs on 3S, 4S, 5S, or 6S batteries.
There are also 2S sockets for JST-EH, JST-XH, and Tamiya LiFe balance plugs.
Delta peak voltage detection for NiCd and NiMH batteries
Re-peak mode for NiMH and NiCd batteries ensures batteries are fully charged and checks how well the battery receives fast charges
Capacity and temperature limits
Data storage for up to five batteries
Servo tester for most digital and analog servos
One year limited warranty against material or operational defects which are present at the time of purchase.
Charger with AC and DC Power Cords, Charge Lead with XT60 type Connector, Charge Lead with Deans type Connector, Alligator Clips, Universal Balance Board, and Instruction Manual.
Specs: AC Input:
Max. Charge Power 80W
Max. Discharge Power 5W
Charge Current Range:
Discharge Current Range:
Disgcarge Current Power:
Current Drain for Balancing LiPo:
NiCd/NiMH Battery Cell Count:
LiPo/LiFe LiIon Cell Count:
Pb Battery Voltage:
Hitec X4 Plus AC/DC Charger Balancer
Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH
and 2-20V lead acid batteries
Fast Charge, Balance Charge and Storage Charge modes for lithium batteries
Automatically controls current rate during charging and discharging
Four independent 50-watt power outputs charges up to four batteries at once
Four independent balancing ports for lithium batteries
Five user customizable presets per output
Twin fan cooling system with internal sensor for controlling fan speed
Batteries can be set to automatically Charge/Discharge or Discharge/
Charge up to a maximum of 5 cycles
Automatic charge termination* if battery temperature gets too high
*Temperature probe (HRCP4159) is required and must be purchased separately
PC-based program can analyze the characteristics of each battery via a USB port*, graph of voltage, current and capacity curves with individual voltage of each cell in a lithium pack can be displayed on a PC- *PC-LINK USB adaptor is required and must be purchased separately, (HRCP4168)
Hitec X4 Plus AC/DC Powered Multi Charger with AC and DC Input Cables Battery Clamps, Tamiya Charge Connector, RX Battery Charge Connector, TP/FP, HP/PQ, and XH type LiPo Balancer Boards two Bare Wire Connectors, Alligator Clip Charging Connector and Manual
Specs: Input Voltage:
AC, 100-120V (330-380W) DC, 11-18V (minimum 20A)
0.1-6.0A (max 50W x 4, total 200W)
0.1-1.0A (max 5W x4, total 20W)
Hitec HC-JST Balance Board m
Balance Board for the Hitec X4 Quad Multi Charger for 2-6S LiPo battery packs
Hitec X4 Temp Sensor
Used with Hitec's X4 Multicharger monitor battery temperatures.
Hitec USB Adapter Cable m Used with Hitec's X4 Multicharger for use with PC.
Hyperion EOS0606i AC/DC
Charger / Discharger with built in Hyperion LBA Balancer
1-6cell Li-Poly, Li-Ion or A123 1-14 cell NiCad / NiMH 10 User memory positions
Includes AC input cable, DC input cable, 2s-6s balancer multi adapter The best on the market in my opinion. $120.00
Hyperion EOS 0720 Super Duo3 charger 2x 1s-7s, 20A Max, 1000W
- Hyperion's most powerful charger to date!
- 1000W total - 500W per port
- Charger delivered with HP and XH lipo adapter plates, USB cable and clips.
- EOS 0720i SDUO3 DC INPUT 11V~28V
- Charge a split-pack in network mode using both ports for up to 14S at 1000W max.
The EOS 0720i Super Duo is Hyperion's flagship charger of all times!
The Super DUO is not to be confused with past models bearing the 0720 designation as they were all single-port chargers. This charger is sporting two identical output ports, each port capable of providing 500W of raw charging power. "0720" is to be interpreted as 7 Cells max - 20Amps max - per port, being a DUO charger.
This is a nomenclature consistent through the Hyperion charger range.
In order to provide all 500W per channel (1000W total), the Super DUO needs 24V-28V of input voltage but can naturally also be operated on lower input voltages (from 11V).
By popular request, Hyperion is for the first time offering two displays in a DUO charger. The benefits are obvious - easy monitoring and less confusion. Like the past DUO's, operation is from a single set of buttons with a channel selector.
The EOS 0720i Super DUO3 is Hyperion's most powerful charger to date!